Readers ask: How Many Foot Pounds To Torque Lug Nuts On A Diesel Pusher Motorhome?

What is the torque on RV lug nuts?

Lug nuts should be torqued to 100 ft/lbs. Always follow the appropriate star pattern as indicated in these instructions or in your axle manufacturer’s owner’s manual to assure proper torque.

What is the torque for a 13/16 lug nut?

just about any steel wheel lug nut is a minimum of 85 lb. -ft. This includes a good majority of Lighter utility/cargo/boat trailers as well as alot of vehicles and light trucks.

What pressure should my RV tires be?

The tire pressure on an average 16″ RV tire can be anything between 35-80 PSI or 280-550 kPa. That’s a wide range – and you need to find the right number for your specific weight and number of wheels.

How many ft lbs should lug nuts be?

A quick glance at a lug nut torque chart shows that most lug nuts should be torqued between 80 and 100 ft-lbs. Some require less torque, others more.

How much torque can a 1/2 drive take?

150 ft-lbs will break a 3/8″ drive usually and about 300 ft-lbs will break a 1/2″ drive. These are on regular breaker bars that are partially hollow and have the little ball in the space of the head to hold the socket. A SOLID 1/2″ heat treated impact rated drive anvil will go up to about 1200 ft-lbs.

You might be interested:  Question: What Is The Wax Chunks That Come Out Of My Gray Water Tank In My Motorhome?

What happens if lug nuts are over torqued?

Excessively tightened lug nuts can strip the threads, distort brake rotors, damage the wheel, and possibly shear off the lug stud.

What should I torque my camper tires to?

Torque Setting for 1/2 Inch Trailer Wheel Lug Nuts or Wheel Bolts On a 12 inch wheel that uses 1/2 inch lug nuts you will need to torque the lug nuts to 75 to 85 foot pounds each.

What is the torque spec for aluminum wheels?

Aluminum wheels should have the lug nuts torqued to 70 ft. lbs. The beadlocks should be 20-22 ft. lbs.

How do I know if my lug nuts are tight?

Push the wheel home on the hub and using your socket wrench, tighten the wheel nuts just enough to hold the wheel snugly. Work in a criss cross pattern, tightening the nut that is almost directly opposite from the nut that you just tightened.

How do you check wheel lug nuts?

If the lug nuts on the wheels are not tightened properly, the lug nuts are likely loose. To test the tightness of the lug nuts, check the torque settings with a torque wrench. Place the torque wrench on the lug nut and then turn it clockwise to see how tight the lug nuts are. Tighten the lug nuts if they are too loose.

Leave a Reply

Your email address will not be published. Required fields are marked *