Question: How Do I No If My Auxillery Start Works On My Motorhome?

What does the auxiliary battery do in an RV?

With the engine off (read: alternator not producing power), the auxiliary battery is used to power all of your interior accessories (interior lights, stereo, 12v fridge/freezer, etc.), thus preserving your starting battery for well, for starting.

What is an auxiliary start switch?

The push button “Aux Start” button engages a relay that temporarily connects the Coach batteries to the Chassis batteries to allow the Coach batteries to “Boost” the Chassis battery allowing the engine to be started. As soon as the “Aux Start” button is released, the batteries are once again isolated.

What is auxiliary start on a motorhome?

If the chassis battery is dead, press AND HOLD the AUX (emergency start) button while turning the key to start the engine. This lets the engine try to start using the house (coach) battery(ies). Once the engine has started release the AUX button.

Can you jump start a motorhome from a car?

Jump Starting Your Motorhome You will need another vehicle to jump -start your battery from and this should be in good condition. You could use your tow-car if you have one, or you should find another motorhome user who will help you out. This should kick start your battery and you will be up and running.

You might be interested:  FAQ: When To Change Oil In Motorhome?

How do you jumpstart an RV with two batteries?

Determine if you have two 12 volt batteries (Parallel) or two 6 volt batteries (Series). If you have two 12 volt batteries, connect the positive side to the red connection first and then attach the negative side of the battery with the black connection or clamp the black connection to a metal piece to ground it.

What is the AUX battery switch?

Auxiliary Battery Switches (ABS) isolate an auxiliary battery from a vehicle’s chassis battery and alternator.

What is an AUX battery?

Auxiliary Battery Overview Auxiliary batteries vary in size and specification dependent on the demands placed on it by the vehicle electrical system and can be used as a safety back-up to support the main battery when required or to provide voltage for specific vehicle systems all of the time.

How do I start my RV generator?

Most onboard generators will have the primer button and starter button located next to each other. To prime your generator, push the prime button down 2-3 times and then hold the start button down until the engine starts.

Leave a Reply

Your email address will not be published. Required fields are marked *